How the Ramsay MultiCraft Aptitude Test works
The MultiCraft Aptitude Test, Form A7, is for applicants to maintenance jobs that cover both mechanical and electrical work. It has 40 questions in 24 minutes, 36 seconds a question, and is taken under a proctor on paper or on screen.
It has two halves. The mechanical half covers the four areas of Ramsay’s Mechanical Aptitude Test: household objects, production and maintenance work, science and physics, and hand and power tools. The electrical half covers electrical mathematics, process flow, signal flow and electrical sequences. Ramsay does not publish how the 40 questions split between the halves.
Your mark is the number right. Ramsay’s published average is 26.95 of 40, from 11,700 candidates, about 67%. Ramsay sets no pass mark; the employer chooses its own.
This is not MultiCrafTest. That is a separate, 60-question Ramsay knowledge test for experienced maintenance staff, and it is the test inside USPS Exam 955, which we cover on our USPS pages.
A method for a mixed paper
Switching between mechanical and electrical questions is part of the test. Have one rule ready for each kind:
- Gears: meshing gears turn opposite ways; a smaller gear turns faster.
- Belts and pulleys: an open belt keeps the direction, a crossed belt reverses it.
- Levers: weight times distance from the pivot must match on both sides.
- Electrical maths: write the formula first, then put the numbers in, and check the unit.
- Flow charts: answer each decision in order and stop at the first box that ends the chart.
- Signal flow: trace one line at a time with your pencil; lines cross, they never join.
- Sequences: name the change between steps before you look at the options.
Worked examples
Pulleys. A 10-inch pulley drives a 5-inch pulley with an open belt. The large pulley turns at 100 rpm. How does the small pulley turn? (A) Same way, 50 rpm (B) Same way, 200 rpm (C) Opposite way, 200 rpm (D) Opposite way, 50 rpm. An open belt keeps the direction, and half the diameter means twice the speed. The answer is B.
Process flow. A chart says: Is the motor running? If no, check the breaker. If yes, is it above 80°F? If yes, shut it down; if no, log the reading. The motor is running at 72°F. What do you do? It is running, so you skip the breaker. It is not above 80°F, so you log the reading.
Tips for the real test
- Do not stall on your weaker half. A quick guess on a hard electrical question leaves time for mechanical questions you can get right.
- Flag and come back rather than reading a hard trace twice.
- Answer every question before time is called. There is no penalty for a guess.
- Check the invitation: a multicraft job may use this test, the separate mechanical and electrical tests, or a basic skills battery as well.
Practise on CogniPrep
Our practice test gives you 40 questions in 24 minutes, five from each of the eight areas, half mechanical and half electrical, mixed through the paper. Drawings, charts and traces are generated fresh each sitting. You can move between questions, flag them and use an answer grid, and your result shows your mark beside Ramsay’s average and the area that cost you most.