How Ramsay Combined Basic Skills works
Combined Basic Skills, Form A4, is four separately timed tests taken in one sitting: Reading, 16 questions in 16 minutes; Arithmetic, 14 in 10; Inspection and Measurement, 10 in 8; and Process Monitoring and Problem Solving, 12 in 14. When one test’s time ends you move on to the next.
Each test gets its own score. Ramsay does not add them together, so the employer sees four marks and may set a different cut on each. Ramsay’s published averages, from 38,677 candidates, are 11.02 of 16 for Reading, 9.85 of 14 for Arithmetic, 6.68 of 10 for Inspection and Measurement, and 7.68 of 12 for Process Monitoring.
Ramsay publishes the part names but not the question types inside each part. Expect workplace notices and procedures in Reading; whole numbers, decimals, fractions, percents and money in Arithmetic; reading a ruler or tape and checking a part against its tolerance in Inspection and Measurement; and reading gauges, charts and simple process logic in Process Monitoring.
A method for each part
- Reading: read the question first, then find the line in the passage that answers it. Use only what the passage says.
- Arithmetic: 10 minutes for 14 questions is under 45 seconds each. Estimate first so you can strike options that are far off.
- Inspection and Measurement: on a tape, count the whole inch, then the longest line past it you can name, then the sixteenths. For a tolerance, write the smallest and largest lengths allowed before you look at the options.
- Process Monitoring: on a gauge, work out what one small division is worth before you read the needle. On a log, read the limit once, then scan the column.
Worked examples
Tolerance. A part must be 2 1/4 in. long, plus or minus 1/8 in. Which length passes inspection? (A) 2 in. (B) 2 3/16 in. (C) 2 7/16 in. (D) 2 1/2 in. The allowed range is 2 1/8 in. to 2 3/8 in. In sixteenths that is 2 2/16 to 2 6/16, and only 2 3/16 falls inside it. The answer is B.
Gauge. A pressure gauge reads 0 to 100 psi, with a long mark every 10 psi and four short marks between each pair of long marks. The needle sits on the third short mark past 40. Five spaces cover 10 psi, so each space is 2 psi, and the reading is 40 + 6 = 46 psi.
Arithmetic. A line makes 240 parts and 15% fail inspection. How many fail? 10% of 240 is 24, and 5% is 12, so 24 + 12 = 36.
Tips for the real test
- Treat each part as its own race. Time left on Reading does not carry over to Arithmetic.
- Answer every question before each clock runs out. A blank scores the same as a wrong answer.
- Arithmetic is the tightest clock, so do the quick sums first and flag the word problems.
- Bring nothing but what you are told to. Scratch paper and pencils are usually handed out.
Practise on CogniPrep
Our practice battery runs the four tests in Ramsay’s order, each on its own clock, and closes each one for good when it ends. Tapes, tolerances, gauges and logs are drawn fresh each sitting, and the reading passages are workplace notices and procedures. Your result shows each part’s mark beside Ramsay’s average for that part, with the part that cost you most.