How the Ramsay Mechanical Aptitude Test works
The Mechanical Aptitude Test, Form MAT-5, is Ramsay’s test of practical mechanical sense for people with no trade experience yet. It has 36 multiple-choice questions and a 20-minute limit, about 33 seconds a question, and it is always taken under a proctor, on paper or on screen. MAT-5 replaced MAT-4, which Ramsay has discontinued, so an older guide quoting MAT-4 is out of date.
Ramsay built the test around everyday objects and common knowledge rather than trade training. Questions fall into four areas: household objects, production and maintenance work, school science and physics, and hand and power tools. Ramsay does not publish how many questions come from each area.
Your mark is simply the number right. Ramsay’s published average is 24.94 of 36, from 10,668 candidates, which is about 69%. Ramsay sets no pass mark: each employer chooses its own cut score, often by job.
A method for mechanical questions
Most questions turn on a handful of rules. Know them cold:
- Two meshing gears turn opposite ways. Count the gears in a chain: odd positions turn with the first gear, even positions against it.
- A smaller gear or pulley driven by a larger one turns faster. Speed changes by the ratio of teeth or diameters.
- An open belt keeps the direction; a crossed belt reverses it.
- A lever balances when weight times distance from the pivot is equal on both sides.
- Water finds its own level, and pressure grows with depth, not with the width of the tank.
- For tools and household objects, picture yourself using the thing before you read the options. The right answer is usually the one a careful worker would do.
Worked examples
Gears. Gear A turns clockwise and drives gear B, which drives gear C. Which way does gear C turn? (A) Clockwise (B) Counterclockwise (C) It does not turn (D) It depends on the size. A turns B the opposite way, counterclockwise, and B turns C the opposite way again, so C turns clockwise. The answer is A. Size changes speed, never direction.
Lever. A 60 lb load sits 2 feet from the pivot of a seesaw. How much weight 3 feet from the pivot on the other side balances it? (A) 30 lb (B) 40 lb (C) 60 lb (D) 90 lb. 60 × 2 = 120, and 120 ÷ 3 = 40. The answer is B.
Tools. Which tool is used to tighten a nut to a set tightness? (A) Adjustable wrench (B) Pipe wrench (C) Torque wrench (D) Locking pliers. Only a torque wrench measures how tight the nut is. The answer is C.
Tips for the real test
- Keep moving. At about 33 seconds a question, a drawing you cannot read in half a minute is a guess and a flag.
- Look at the drawing before the options: trace the gears or belts with your eye and decide the answer, then find it.
- Answer every question. A blank scores the same as a wrong answer.
- Use the scratch paper for lever sums. Two sheets are normally handed out.
- If the job is electrical or multicraft, you may be sent the Electrical or MultiCraft Aptitude Test instead, so check the invitation.
Practise on CogniPrep
Our free practice test gives you 36 questions in 20 minutes, nine from each of Ramsay’s four areas, with drawn gears, belts, pulleys, levers and tanks generated fresh each time, so a second sitting is a new paper. You can move between questions, flag them and check an answer grid. Your result shows your mark beside Ramsay’s published average and tells you which area cost you most.