How the Saville mechanical reasoning test works
Each question is one drawing with labelled arrows or parts and a short question: which way the end of a bar moves when a handle is pulled, which handle needs less force, which way the last gear turns. There are three options, usually Direction A, Direction B and Neither direction, or A, B and “both are equal”.
Saville’s preparation guide covers linkages, levers, gears, belts and pulleys, beams under load and a wheel driving a rod. The test is strictly timed and, like most aptitude tests, gets harder as you go.
You are most likely to meet it inside Swift Technical Aptitude, Saville’s 10-minute battery for technical roles such as production workers, apprentices, engineers, designers and scientists, where it sits between a spatial part of 3 minutes and a diagrammatic part of 4. Saville lists both Mechanical Reasoning and Swift Technical among the tests that cannot be taken on a mobile phone.
Rules that answer most questions
Most questions test one of a handful of principles:
- Gears that mesh turn in opposite directions, so in a row every second gear turns the same way as the first.
- Gears fixed on one shaft turn together, in the same direction and at the same speed.
- An open belt keeps the direction of turn; a crossed belt reverses it.
- A smaller wheel driven by a larger one turns faster, and a larger one driven by a smaller one turns slower.
- A lever balances when weight times distance from the pivot is equal on both sides, so pushing further from the pivot needs less force.
- In a linkage, follow each bar from the handle: a bar pivoted in its middle reverses the motion, one pivoted at its end keeps it.
- If nothing in the drawing passes the motion on, or two effects cancel out, the answer is Neither.
Worked example
Four gears mesh in a row, and the first turns clockwise. A small fifth gear is fixed on the same shaft as the fourth. Which way does the fifth gear turn? A Clockwise, B Anticlockwise, C Neither direction.
The second gear turns anticlockwise, the third clockwise and the fourth anticlockwise. The fifth shares the fourth’s shaft, so it turns with it: B, anticlockwise. The usual wrong answer is A, from counting the fifth gear as if it meshed with the fourth.
Tips for the real Saville mechanical reasoning test
- Take Saville’s free Mechanical Reasoning practice test on a computer to see the drawings and options.
- Budget about 22 seconds a question, the pace of the guide’s 8 in 3 minutes, and give your best answer rather than stall.
- Read what the arrow shows before you answer: the way the handle moves, or the way you are asked about.
- Learn the rules above until they are automatic. Most questions need one of them, not a calculation.
- Saville’s own advice is to work with tools and things with moving parts and to read technical manuals.
Practise Saville Mechanical Reasoning on CogniPrep
Our Mechanical Reasoning game has two sections of 4 questions, each on its own 90-second clock, as in Saville’s practice test. Each question is one drawing with three options, from a bank of 41 covering gears, belts, pulleys, levers, springs, slopes, liquids and pistons, with questions you have not seen served first. You can move freely and change answers within a section. Your result is the number right out of 8, with a sten against CogniPrep candidates and your pace against the 22 seconds a question the sections allow. Our drawings do not include linkages yet, which the real test uses.